Isdn Configuration Commands - 3Com 3031 Command Reference Manual

264 C 4: L L
HAPTER INK AYER
vlan-type dot1q
ISDN Configuration
Commands
debugging isdn
P
ROTOCOL
For the related command, see display vlan statistics vid.
Example
Clear the statistics with VLAN ID 10.
<3Com> reset vlan statistics vid 10
Syntax
vlan-type dot1q vid vid
View
Interface view
Parameter
vid: VLAN ID, used to identify a VLAN, its value ranges from 1 to 4094.
Description
Using the vlan-type dot1q command, you can set the encapsulation types on the
sub-interface.
By default, there is no encapsulation on the subinterface, nor VLAN ID related to
the subinterface.
For the related command, see display vlan interface.
Example
Set the Ethernet sub-interface 2/0/0.1 to be related to VLAN ID 60, and its
encapsulation format is dot1q.
[3Com-Ethernet2/0/0.1] vlan-type dot1q vid 60
Syntax
debugging isdn { cc | q921 | q931 | spid } [ interface type number ]
undo debugging isdn { cc | q921 | q931| spid } [ interface type number ]
View
User view
Parameter
cc: Enables ISDN CC module debugging.
q921: Enables Q.921 debugging.