Configuration Command Of Virtual Template And Virtual Access Interface - 3Com 3031 Command Reference Manual

230 C 3: I
HAPTER NTERFACE
Configuration
Command of Virtual
Template and Virtual
Access Interface
broadcast-limit link
display interface
virtual-template
M C
ANAGEMENT OMMANDS
Syntax
broadcast-limit link number
undo broadcast-limit link
View
Virtual template view
Parameter
number: Maximum link number that the virtual template supports for sending
multicast or broadcast packets, ranging from 0 to 128. The default value is 30.
Description
Using the broadcast-limit link command, you can configure the maximum link
number that virtual template supports for sending multicast or broadcast packets.
Using the undo broadcast-limit link command, you can restore the default
configuration.
When there are many links on a virtual template, sending multicast or broadcast
packets from each link may influence the function of the system. In this case, the
broadcast-limit link command can be used as a limitation, so that multicast or
broadcast packets are discarded if the link number exceeds the limitation.
Example
Configure maximum link number of virtual template 1 supporting sending
multicast or broadcast packet to be 100.
[3com] interface virtual-template 1
[3com-Virtual-Template1] broadcast-limit link 100
Syntax
display interface virtual-template [ number ]
View
Any view
Parameter
virtual-template: Virtual template.
number: Number of virtual template, ranging from 0 to 1023. The state of all
virtual template will be displayed, if this parameter is not specified.