Ip Performance Configuration Commands - 3Com 3031 Command Reference Manual

440 C 5: N
HAPTER ETWORK
reset dhcp relay
statistics
IP Performance
Configuration
Commands
debugging ip
P
ROTOCOL
all: In the undo form of the command, the first "all" refers to all the relay
addresses and the second all, the interfaces.
Description
Using the ip relay address interface command, you can configure a relay address
for the Ethernet interfaces in a specified range for the purpose of transparent
forwarding. Using the undo ip relay address interface command, you can delete
the configured relay address.
By default, no relay IP address has been configured on any Ethernet interface.
For the related command, see ip relay address.
Example
Add a relay IP address for the interfaces in the range of Ethernet2/0/0.1 to
Ethernet2/0/0.5.
[3Com] ip relay address 202.38.1.2 interface ethernet 2/0/0.1 to
ethernet 2/0/0.5
Syntax
reset dhcp relay statistics
View
User view
Parameter
None
Description
Using the reset dhcp relay statistics command, you can clear the DHCP relay
statistics.
For the related command, see display dhcp relay statistics.
Example
Clear the DHCP relay statistics.
<3Com> reset dhcp relay statistics
Syntax
debugging ip { icmp | packet [ acl { acl-number1 | acl-number2 } ] }
undo debugging ip { icmp | packet }
View
User view