3Com 3031 Command Reference Manual page 771

display mpls ldp
interface
display mpls ldp lsp
Description
Using the display mpls ldp buffer-info command, you can view the buffer
information of LDP.
Example
Display LDP buffer information.
[3Com] display mpls ldp buffer-info
-----------------------------------------------------------------
Buffer-Name Buffer-ID
-----------------------------------------------------------------
ENTITY 0
LOCAL-IF 1
PEER-IF 2
PDU 3
ADJACENCY 4
PEER-INF 5
SESSION 6
US-BLK 7
DS-BLK 8
FEC 9
US-LIST 10
TRIG-BLK 11
LABEL-RANGE 12
CR-TUNNEL 13
ER-HOP 14
IF-MSG 15
-----------------------------------------------------------------
Buffer no error.
Syntax
display mpls ldp interface
View
Any view
Parameter
None
Description
Using the display mpls ldp interface command, you can view the information of an
LDP-enabled interface.
For the related commands, see mpls ldp enable and display mpls ldp session.
Example
Display the information of an LDP-enabled interface.
[3Com-Ethernet3/0/0] display mpls ldp interface
Syntax
display mpls ldp lsp
LDP Configuration Commands
Buffer-Size Total-Count
292 199
36 200
40 201
204 249
56 201
116 201
176 201
264 1052
240 1052
40 1042
16 1052
56 2076
20 198
124 128
40 4096
24 9999
771
Free-Count
195
196
195
249
198
198
198
1028
1042
1032
1028
2071
198
128
4096
9999