Daily Maintenance; Hydraulic Hose Age; Pre-Operational Inspection - Snorkel MHP1335 Repair Parts Manual

Daily Maintenance

Pre-operational Inspection

Components
Engine fuel level
Fuel tank cap
Engine oil level
Fuel leaks
Wiring harnesses
Battery terminals
Battery fluid level
Hydraulic oil
Hydraulic oil leaks
Tires and wheels
Bolts and fasteners
Structural damage and welds
Lanyard anchor points
Platform gate
Platform guardrails
Air filter
Control switches
Emergency lower
Placards and decals
Optional items
Pins and pin keepers

Hydraulic Hose Age

Hoses used in Snorkel production units are manufactured by Hydraulink, Parker and Eaton and have
a code stamped on them that offers the following information.
Hydraulink Sample Hose Code
Month of Manufacture
Parker Sample Hose Code
Manufacturing Plant Number
Eaton Sample Hose Code
Manufacturing Period (i.e. 2nd Quarter)
MHP13/35 & MHP15/44 V3 – 13619-2
2-2005 lot 050519/10
-
2005
2
Year of Manufacture
11- 4Q 99
-
11 4Q 99
Manufacturing Period (i.e. 4th Quarter)
2Q 06
2Q 06
Rev B
Maintenance Information
Service Required
Check fuel tank level (full)
Visually inspect (installation, tightness)
Check oil level (between dipstick lines)
Visually inspect (hoses, connections, etc.)
Visually inspect (installation, condition)
Visually inspect (no corrosion)
Check fluid level (1/4" or 6 mm below filler neck)
Check fluid level (between lines on tank)
Visually inspect (hoses, tubes)
Visually inspect (condition)
Visually inspect (looseness)
Visually inspect (weld cracks, dents)
Visually inspect (condition)
Visually inspect (operation)
Visually inspect (condition)
Check condition
Actuate and inspect (operation)
Check operation (causes correct motion)
Visually inspect (installation, condition)
Check operation
Visually inspect (installation, condition)
Lot number
lot 050519/10
Year of Manufacture
Year of Manufacture
page vii