90 Day Or 150 Hour Maintenance; (Trained Service Technician); Yearly Or 500 Hour Maintenance (Trained Service Technician) - Snorkel MHP1335 Repair Parts Manual

Maintenance Information

90 Day or 150 Hour Maintenance

(Trained Service Technician)

Components
Daily maintenance
Preventive inspection
maintenance checklist
Placards and decals inspection
Rotation bearing
Rotation bearing teeth & pinion
Platform rotator
Platform controller
Battery
Hydraulic return filter
Engine RPM
Engine oil
Yearly or 500 Hour Maintenance
(Trained Service Technician)
Components
90 day or 150 hour maintenance
Hydraulic oil reservoir
Hydraulic return filter
Hydraulic pressures
page viii
Service Required
Perform maintenance as per schedule
Perform inspection, complete form
Inspect using drawing and parts listing
in section 1 (repair parts)
Lubricate
Lubricate
Check smooth operation
Check smooth operation & speeds
Check specific gravity
Check condition
Check for proper engine RPM (2500)
Replace per engine owners manual
Service Required
Perform maintenance per schedule
Clean and replace fluid
Replace
Check pressures
Rev B
Recommended Lubricant or Further
Instructions
Retain copy of checklist
Replace any missing or
unreadable decals/placards
Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L
Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L
Repair or replace if not working
properly
1.260/1.275 at 27° C.
Replace if dirty
See engine manufactures owner's
manual
Recommended Lubricant or Further
Instructions
Shell Tellus 32 or similar
After 1st. 50 hours, thereafter
at recommended interval
MHP13/35 & MHP15/44 V3 – 13619-2