10.9 Height Restriction
unqualified person from operating the machine in
the unrestricted mode.
Tamper Protection
In order to reduce the likelihood of the machine
being tampered with to gain the extra height by an
unqualified operator, a tamper protection device is
installed on the machine.
This consists of a lockwire and lead seal and the
owner must check this on a regular basis to
ENSURE that the protective device is in place.
WARNING
If the seal is broken the owner of the machine
must:
1. ENSURE that the 10.9m lockout function
still operates correctly.
2. Replace the seal.
3. ENSURE that the machine continues to
meet the requirements of the relevant
Australian legislation.
page 4
Rev B
MHP13/35 & MHP15/44 V3 – 13619-2