General Specifications; General Specifications Mhp13/35 Mark Ii - Snorkel MHP1335 Repair Parts Manual

The Snorkel MHP13/35 & MHP15/44 Mark II are boom supported elevating work platforms built to conform
to these standards, American Standard ANSI A92.2
Australian Standard AS1418-10(Int) Elevating Work Platforms.

General Specifications MHP13/35 Mark II

SPECIFICATIONS
Working height
Platform height
Rated load
Rated load (with rotator)
Platform size
Platform construction
Platform levelling
Boom type
Horizontal reach
Maximum wind speed 12.5m/s
Turntable rotation
Power source (std.)
Hydraulic system
Stabilisation
Stabiliser footprint (max.)
Standard colour
Transport height
Overall length
Overall width - outriggers extended
Overall width - outriggers stowed
Tyre size (standard)
Brakes
Maximum towing speed
Maximum rated axle capacity
Weight (standard model)
Insulation rating
Trailer tongue weight (approx)
Maximum chassis inclination
Maximum outrigger load
Maximum allowable force
MHP13/35 & MHP15/44 V3 – 13619-2

General Specifications

MHP13/35 Mark II
12.6m
10.6m
250kg (227kg ANSI)
227kg (200kg ANSI)
1250 x 780 x 1070mm
Mechanical
Articulating
5.6m at 6m
45kph
O
540 non-continuous or 360
Gasoline engine 5.5hp
Proportional electro/hydraulic
4 independently operated hydraulic outriggers with safety
interlocks
3.7 x 3.6m
Snorkel orange base and covers, white turret and booms
2.05m
5.99m
3.95m
1.58m
185 R14
Hydraulic disc
80kph
1750kg
1260kg (approx)
65kg
920kg
Rev B
41'
35'
550lb (500lb ANSI)
500lb (440lb ANSI)
4.1' x 2.6' x 3.5'
Steel
18.4' at 19.7'
28mph
O
continuous
12.1' x 11.8'
6.7'
19.7'
12.1
5.2'
50mph
3858lb
2777lb (approx)
Nil
143lb
O O
1 /1
2028lb
400N
page i