Time And Date Management; How To Check/Adjust The Machine Time And Date - quadient IN-700 User Manual

8.13

Time and Date Management

Daylight Savings Time Transitions
Your Mailing System normally auto-adjusts to Daylight Savings Time. However, if a manual
adjustment is necessary, you can use either of the following procedures to correct the
Mailing System time:
• As a user: How to Unlock the PSD
• As supervisor:
Time and Date Set-up
Time and date are required for postage and are provided by the postal authorities. As a
result, you cannot manually adjust the system time and date.
However, you can ask the system to check the current time and date and display them.
See also
• Automatic Date Advance

How to Check/Adjust the Machine Time and Date

To check the current time and date:
1. In supervisor mode (see
Press
2. Select Audit call to adjust the time.
The system adjusts its time if necessary and displays time and date values.
How to Check/Adjust the Machine Time and Date
on page 203.
To check the time and date, make sure the connection to the Postal
Services is available. See
Connection on page 209.
How to Log in as Supervisor
and select the path:
If you are processing postage at the time when the system clock
adjusts for daylight savings time, the Mailing System will wait until
you are finished before displaying the new time.
on page 98
How to Set the Postal/Online Services
on page 180):
Machine Settings
on page 211
Date and Time
211
8