Tecnosicurezza TechMaster User Instructions page 8

User instructions
Users from 02 to 90: 02-020202, 03-030303, and so on. They always open with time delay if
set.
Override users: thanks to the setup software, it is possible to configure users in between 10
and 90 (10-101010, 11-111111, and so on) as override users. They always open without time
delay.
The table below reports the main users functions.
Master
Access to Master Menu
Set time and date
Set Time Lock periods
Audit download
Manager Management
Enable/disable OTCs
Change code
PC Link
Override manager
Access to Ovr. Manager menu
Override users management
Code changing
Override users
Opening
Change code
This user manual describes the standard programming. According such programming and
unless different requests while ordering the product, an opening can be performed by
entering single users codes (no dual mode) and without time delay. Thus, the user manual
must be adapted according the configuration selected.
It is strongly recommended to change the default codes before using the lock.
8 of 27
Manager
Access to Manager Menu
Standard users management
Override users management
Set time delay
Set variable time delay
PC Link
Audit download
Opening
Code changing
Set opening extension
Set immediate time lock
Configuration menu
Install/remove locks
Set display contrast
Change language
Test mode
Check system Informations
Standard users
Opening
Set opening extension, if enabled
Set immediate time lock, if enabled
Code changing
TechMaster
IU_ TechMaster_04_eng