Weekly Time Lock Settings - Verify Or Delete Values; Closing Periods (Off Days) - Add New Values - Tecnosicurezza TechMaster User Instructions

User instructions
interval from 08.00 to 14.00 from Monday to Friday: the safe can be only opened from
08.00 to 14.00 and only in those days, it cannot be opened before 08.00 and after 14.00.
Moreover, safe cannot be opened on Saturdays and Sundays).
It is possible to schedule up to 4 time intervals per day (ex. Monday from 07.00 to 10.00,
from 12.00 to 13.00, 15.00 to 16.00 and 18.00 to 19.00).
Weekly time lock settings – Verify or delete values
Enter Time Lock menu and press
Press . LCD shows:
Press . LCD shows:
Press . LCD shows the values for the first day.
Press to scroll all the schedules list.
Press on a schedule. LCD shows:
Press to confirm or
At the end of the list, press
Closing periods (OFF days) – Add new values
Closing periods are time intervals in which is possible to close the lock even when a time
lock is enabled.
It is possible to schedule up to 60 closing periods (they can be opening or closing periods).
Each one of them has a maximum time length of 14 days.
WARNING: during closing periods, the safe cannot be opened.
Enter Time Lock menu and press
Press . LCD shows:
Press . LCD shows:
Press . LCD shows:
The first one is an closing time while second one is an opening time.
Enter the time of start and the ending time for the closing period,
then press to confirm.
Should the year be set, the closing period is not repeated.
Should not the year be set (press
14 of 27
. LCD shows:
to exit.
. LCD shows:
until LCD shows:
), the closing period is yearly repeated instead.
TechMaster
WEEKLY TIME LOCK
T1 SETTING
ADD NEW VALUES
VERIFY OR DELETE
VALUES
FRI
hh:mm
hh:mm
DELETE VALUES?

END OF LIST
EXIT?
WEEKLY TIME LOCK
T1 SETTING
CLOSING PERIODS
SETTING
ADD NEW VALUES
GG/MM/AA hh:mm
GG/MM/AA hh:mm
IU_ TechMaster_04_eng