Variable Time Delay - Verify Or Delete Values; Pc Connection - Tecnosicurezza TechMaster User Instructions

TechMaster
Enter values for starting time and ending time in which Variable
Time Delay must be active and then enter the values of Variable
Time Delay.
Press to confirm. LCD shows the next day of the week,
proposing the same time values. Press
select another day without entering new time values or else enter
the new time values as previously illustrated.
At the end of the week, LCD shows:
Press to save the values or
weekday.
After saving the values, LCD shows:
Press to set new values (max. 4)
Variable Time Delay – Verify or delete values
Enter Variable Time Delay menu and press
Press . LCD shows the values for the first day.
Press to scroll all the schedules list.
Press on a schedule. LCD shows:
Press to confirm the deletion or
At the end of the list, press

PC connection

Use this function to enable the connection between the keypad and PC.
Power up the keypad. Enter the Manager menu. Press
shows:
Press to start the connection with PC.
Press to stop the connection with PC.
If the static codes have been deleted, PC connection can be enabled by using the dynamic
user AUDIT.
IU_TechMaster_04_eng
to confirm or
for coming back to the first
until LCD shows:
to exit.
. LCD shows:
User instructions
hh:mm
to
END OF LIST
AND SAVE?
ADD NEW VALUES
VERIFY OR DELETE
VALUES
08:00
10:00
DELETE VALUES?
END OF LIST
AND SAVE?
PC LINK
until LCD
PC LINK
:mm
EXIT

DOM
: 01

EXIT

...
19 of 27