Bcd And D/A Output Setting; Outline; Controls And Indicators (Rear Panel) - KYOWA WGA-910A Series Instruction Manual

4. BCD and D/A OUTPUT SETTING

4-1. OUTLINE

The measured value can be acquired as BCD or binary coded data, and the measured value output converted to the
analog signal can be taken out simultaneously by the optional BCD and D/A output.

4-2. CONTROLS AND INDICATORS (REAR PANEL)

(1)
(1) BCD connector
(2) D/A output terminal block
Retrieves the indicated values as the BCD data.
Controlled by using various input signals and output signals.
Converts the measured values into analog signals and outputs them.
V : Voltage output
O
I : Current output
O
26
(2)