D/A Output Set; D/A Display - KYOWA WGA-910A Series Instruction Manual

2-6. D/A OUTPUT SET

2-6-1. D/A Display

Sets the measured value (zero display) of 0 V or 4 mA output and the measured value (full display) of 10 V or 20 mA
output.
<Setting Range>
Zero Dsp. (Zero Display): -99999 to 99999
Full Dsp. (Full Display):
<How to operate>
1) Press the
D/A Output Setting
2) Press the
window.
3) After pressing the
numerical keyboard.
Press the
4) After pressing the
numerical keyboard.
Press the
NOTE
Be sure to set the ZERO display < Full display.
Or, the correct voltage and correct output are not output.
-99999 to 99999
key on the "Option Setting" window.
key on the "D/A Output Setting"
D/A Display
key, input a setting value with the
key for registering.
key, input a setting value with the
key for registering.
Zero Dsp.
Push 'Zero Dsp.'or 'Full Dsp.'key for
activating the target window.Input the
desired value and push 'Register'key.
Push 'Zero Dsp.'or 'Full Dsp.'key for
activating the target window.Input the
desired value and push 'Register'key.
17
Option Setting
Return
'Communication Speed','Trans-
Com.Setting
mission Mode'and 'Device ID'
of RS-232C/485 are set.
'Transmission Speed',logic of
BCD Output Setting
each output,and 'BCD Classifi-
cation are set.
'Zero Dsp.'(0V) or 'Full Dsp.'
D/A Output Setting
(10V),and 'D/A Classifica-
tion' are set.
'The Number of Occupied
CC-Link Setting
Stations','Transmission Speed'
and 'Station Number' are set.
D/A Output Setting
Return
The indicated value that is
D/A Display
outputted 0V(Zero Display) or
10V(Full Display) is set.
Select data to output to D/A
D/A Classification
output.
Peak Value
D/A Display
Return
Now
Full Dsp.
0.00 kN
-50.00 kN
New New
+/- 7 8 9 C
4 5 6
0 1 2 3
D/A Display
Return
Now
Zero Dsp. Full Dsp.
0.00 kN
-50.00 kN 80.00
New New
+/- 7 8 9 C
4 5 6
0 1 2 3
Measure
Measure
Measure
Now
100.00 kN
kN
Register
Measure
Now
100.00 kN
kN
Register