Connecting Bcd Output; Setting Bcd Output - KYOWA WGA-910A Series Instruction Manual

1-5. CONNECTING BCD OUTPUT

Applicable connectors of the cable side are as follows when connecting the external device.
Applicable connector
Connector
Cover
NOTE
The model and manufacture of connectors in BCD option is different from that of BCD connectors in
BCD and D/A option (Model: WGA-910A-12).

1-6. SETTING BCD OUTPUT

(1) Transmission Speed
Sets the transmission speed of the BCD data output.
<Setting Range>
Approx. 16, 32, 64, 125, 250, 500, 1000 times/sec.
<How to operate>
1) Press the
2) Press the
window.
3) Press the target key and
(2) EOC Logic
Sets the logic of the EOC (end of conversion) output.
For the negative logic, the open collector output of the BCD output terminal is ON, for the positive logic, the output
is OFF.
<Setting Range>
Negative logic / Positive logic
<How to operate>
1) Press the
window.
Model: FCN-361J040-AU
Model: FCN-360C040-B
key on the "Option Setting" window.
key on the "BCD Output Setting(1/2)"
key to register the target value.
key on the "BCD Output Setting(1/2)"
Manufacture: FUJITSU COMPONENT LIMITED
Manufacture: FUJITSU COMPONENT LIMITED
Option Setting
BCD Output Setting
D/A Output Setting
BCD Output Setting
Transmission Speed
Transmission Speed
Push the target key and 'Register'key.
9
Return
'Communication Speed','Trans-
Com.Setting
mission Mode'and 'Device ID'
of RS-232C/485 are set.
'Transmission Speed',logic of
each output,and 'BCD Classifi-
cation are set.
'Zero Dsp.'(0V) or 'Full Dsp.'
(10V),and 'D/A Classifica-
tion' are set.
'The Number of Occupied
CC-Link Setting
Stations','Transmission Speed'
and 'Station Number' are set.
Return
The transmission speed of BCD
data is set.
16times/sec
The logic of EOC(end of con-
EOC Logic
version)output is set.
Negative Logic
The logic of minus(polarity)
Polarity Logic
output is set.
Negative Logic
The logic of data output(such
Data Logic
as 10)is set.
Negative Logic
Next
Return
Now
New 125times/sec
16times/sec
16times/sec 32times/sec
64times/sec 125times/sec
BCD Output Setting
Return
The transmission speed of BCD
Transmission Speed
data is set.
16times/sec
The logic of EOC(end of con-
EOC Logic
version)output is set.
Negative Logic
The logic of minus(polarity)
Polarity Logic
output is set.
Negative Logic
The logic of data output(such
Data Logic
as 10)is set.
Negative Logic
Next
Measure
Measure
1 / 2
Measure
Register
Measure
1 / 2