KYOWA WGA-910A Series Instruction Manual page 13
For options bcd, d/a, rs-485, bcd and d/a
Hide thumbs
Also See for WGA-910A Series:
- Instruction manual (150 pages) ,
- Instruction manual (36 pages)
Table of Contents
Advertisement
2) Press the target key and
(3) Polarity Logic
Sets the logic of the minus (polarity) output.
<Setting Range>
Negative logic / Positive logic
<How to operate>
1) Press the
window.
2) Press the target key and
(4) Data Logic
Sets the logic of the data output (10 etc).
<Setting Range>
Negative logic / Positive logic
<How to operate>
1) Press the
window.
2) Press the target key and
key to register the target value.
key on the "BCD Output Setting(1/2)"
key to register the target value.
key on the "BCD Output Setting(1/2)"
key to register the target value.
Push the target key and 'Register'key.
Push the target key and 'Register'key.
Push the target key and 'Register'key.
10
EOC Output Logic
Return
Now
New
Positive Logic
Negativ Logic
For EOC output logic:negative
Negative Logic
(open-collector output:ON)
For EOC output logic:positive
Positive Logic
(open-collector output:OFF)
BCD Output Setting
Return
The transmission speed of BCD
Transmission Speed
data is set.
16times/sec
The logic of EOC(end of con-
EOC Logic
version)output is set.
Negative Logic
The logic of minus(polarity)
Polarity Logic
output is set.
Negative Logic
The logic of data output(such
Data Logic
as 10)is set.
Negative Logic
Next
Polarity Logic
Return
Now
New
Positive Logic
Negativ Logic
For minus output logic:nega-
Negative Logic
tive(open-collector output:ON)
For minus output logic:posi-
Positive Logic
tive(open-collector output:
OFF)
BCD Output Setting
Return
The transmission speed of BCD
Transmission Speed
data is set.
16times/sec
The logic of EOC(end of con-
EOC Logic
version)output is set.
Negative Logic
The logic of minus(polarity)
Polarity Logic
output is set.
Negative Logic
The logic of data output(such
Data Logic
as 10)is set.
Negative Logic
Next
Data Logic
Return
Now
New
Positive Logic
Negativ Logic
For data output logic:negative
Negative Logic
(open-collector output:ON)
For data output logic:positive
Positive Logic
(open-collector output:OFF)
Measure
Register
Measure
1 / 2
Measure
Register
Measure
1 / 2
Measure
Register
Advertisement
Table of Contents
