GE Feeder Management Relay 750 Instruction Manual page 55

4 USER INTERFACES
b) INSTALLING/UPGRADING 750/760PC
Installation/upgrade of the 750/760PC software is accomplished as follows:
1. Ensure that Windows is running on the local PC.
2. Insert the GE Multilin Products CD into your CD-ROM drive or point your web browser to the GE Multilin website at
http://www.GEindustrial.com/multilin. With Windows 95/98 or higher, the Products CD will launch the welcome screen
automatically; with Windows 3.1, open the Products CD by launching the index.htm file in the CD root directory.
The Products CD is essentially a "snapshot" of the GE Multilin website at the date printed on the CD. As such, the pro-
cedures for installation from the CD and the web are identical; however, to ensure that the newest version of 750/
760PC is installed, installation from the web is preferred.
3. Click the Index by Product Name item from the main page and select 750/760 Feeder Management Relay from the
product list to open the 750/760 product page.
4. Click the Software item from the Product Resources list to go to the 750/760 software page.
5. The latest version of the 750/760PC software will be shown. Click on the 750/760PC Program item to download the
installation program to your local PC. Run the installation program and follow the prompts to install to the desired direc-
tory. When complete, a new GE Multilin group window will appear containing the 750/760PC icon.
GE Multilin
Courtesy of NationalSwitchgear.com
Figure 4–3: GE MULTILIN WELCOME SCREEN
750/760 Feeder Management Relay
4.2 750/760PC SOFTWARE INTERFACE
Specific resources can be
accessed from this menu
Select 750 (or 760) from
the Products list to proceed
directly to the 750 (or 760)
Feeder Management
Relay Product Page
Technical publications
and support for the 750/760
can be accessed through
the Support menu
4
4-9