Multitech MultiModemISDN MTA128ST-USB User Manual page 54

MultiModemISDN User Guide
S-register: S66
Function:
Unit:
Range:
Default:
Description:Sets the frequencies and cadences used when ringing the device attached to
S-register: S67
Function:
Unit:
Range:
Default:
Description:Sets the POTS port ring signal for single or dual cadence. Examples of a
54
Country Selections for POTS Ring Signal
Decimal ASCII code
n=0–27
0 Default
1 Custom single
2 Custom dual
3 Austria
4 Belgium
5 Cyprus
6 Denmark
7 Finland
8 France
9 Germany 1
10 Germany 2
11 Greece
12 Iceland
13 Ireland
14 Italy
15 Luxembourg 1
16 Luxembourg 2
17 Malta
18 Netherlands
19 Norway
20 Portugal
21 Spain
22 Sweden
23 Switzerland 1
24 Switzerland 2
25 United Kingdom 1
26 United Kingdom 2
27 United States
0 (25 Hz, single ring, 2 sec. on, 4 sec. off)
the POTS port (phone, modem, fax). Select the appropriate country to use
the frequencies and cadences specified according to ETS 300 001 (Chapter
1:1992, p. 56). The Austria and France settings default the frequency to 25
Hz since the TA doesn't support a 50 Hz nominal frequency. A number 1 or 2
next to a country name indicates the availability of either alternate nominal
frequencies or alternate cadences. You also can configure frequencies and
cadences by using @CONFIG menu (selection #6—POTS Port
Configuration) and/or with S-registers S44, S67, S68, S69, S70, and S71.
Save configurations with the &W or &W0 command.
Single or Dual Cadence Ring Signal
Decimal ASCII code
0 (Single), 1 (Dual)
0 (Single-cadence ring signal)
dual cadence include Ireland (S66=13), United Kingdom 1 (S66=25), and
United Kingdom 2 (S66=26).
MTA128ST-USB