Multitech MultiModemISDN MTA128ST-USB User Manual page 30

MultiModemISDN User Guide
Data Call Commands
A
D
DSn
&Jn
H
In
On
@Config
Command Implementation
Command: AT
Function:
Values:
Default:
Description:The attention code precedes all command strings except the A/ command
Command: RETURN
Function:
Default:
Values:
Description:Press RETURN (ENTER) to execute a command. In command examples,
Command: +++AT<cr>
Function:
Values:
Default:
Description:Makes TA enter command mode (without disconnecting the call) when it is
Command: <break>AT<cr>
Function:
Values:
Default:
Description:Places TA in command mode while remaining on-line. Enter a break signal,
30
Answer
Dial
Dial Stored telephone number
Channel Bundling
Hang up
Display product information
Return on-line
Start ConfigMenu
Attention Code
n/a
n/a
and escape codes.
Command Execution
n/a
n/a
RETURN frequently is abbreviated <cr>.
In-Band Escape Code
ASCII
+ (43)
on-line with a remote device. Default escape code is three + characters
followed by the letters AT, up to 80 command characters and a RETURN
(press Enter). The TA escapes to command mode, executes any commands
in the string, and then remains in command mode. Use S2= command to
change the escape character.
Out-of-Band Escape Code
n/a
n/a
the letters AT, up to 80 command characters, and a RETURN (press Enter).
MTA128ST-USB