Multitech MultiModemISDN MTA128ST-USB User Manual page 20

MultiModemISDN User Guide
Note:
Modem Installation
After the driver software has been installed, you will need to install the appropriate
modems. These are included on the driver disk shipped with your MTA128ST-USB.
1. Click Start | Settings | Control panel | Modems.
2. The Modems Properties dialog box is displayed.
3. From the General tab, click the Add button.
4. The Install New Modem dialog box is displayed. Ensure that the "Don't detect my
5. The Install New Modem dialog box is displayed listing the Manufacturer and Model
6. The Install New Modem dialog box is displayed indicating that your modem(s) have
Note:
Installing in Windows 95
Only certain versions of Windows 95 (OSR2.1, Revision C) offer support for USB
peripherals. If you are unsure if your Windows 95 system supports USB, a free USB
evaluation utility is available from the Shopping Bag page at http://www.usb.org. Down-
load the utility (287K) and run the .exe application to determine if you have USB support.
If you would like to install your MTA128ST-USB in Windows 95, do the following:
1. Power up your Windows 95 system.
2. Turn on your MTA128ST-USB. The LS (Power) LED will light.
3. Plug the "D-shaped" end (Type B) of your USB cable into the USB connector on the
4. Windows will detect that the new modem is present and launch the Update Device
5. Windows searches for the driver on A:\ and, when identified, will display the driver
6. Windows prompts you to insert a diskette. Insert it and click OK to continue. The
7. When the driver is installed, a completion message will appear and the wizard will
Note:
Panel
20
My Computer Properties Device Manager
modem: I will select it" option is selected and click Next >.
options. Click the Have Disk button and select the appropriate models (MTA128ST-
USB Auto-Protocol, MTA128ST-USB Multi Link PPP, MTA128ST-USB PPP async,
MTA128ST-USB V.110 async, MTA128ST-USB V.120 async, and MTA128ST-USB
X.75 async), and then click Next >.
been set up successfully.
Start Settings Control Panel
back of the unit (See Figure 2-3).
Driver Wizard. Click Next > to proceed with the installation.
name for verification. Click Finish to install the driver.
Copy Files ... dialog box is displayed. In the Copy files from field, choose A:\ from
the drop-down list and click OK.
exit. At this time your installation is complete.
Modems
Modems
Start Settings Control
MTA128ST-USB