ML20600 Series Mortise Lock
4. Configuring the Fail Safe/Fail Secure and RX* DIP switch settings:
Please note that the lock must be electrically cycled once in order for setting changes
to take effect.
*RX output only configurable for locks
with end-of-line resistance monitoring.
Default is normally open.
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Installation Instructions (Continued)
9
Check polarity:
Verify + (red) wire