Assa Abloy Corbin Russwin Access 600 ML20600 TCRNE1 Series Installation Instructions Manual page 16

ML20600 Series Mortise Lock
Step 4
Inside Face of Door
Step 5
Adjustment bolt needs
to be threaded in farther.
Step 6
Notes:
• Unthread Adjustment Bolt approximately four turns
for a good starting point (After being fully tightened)
• Make sure O/S lever is fully inserted into adapter
plate before aligning adjustment bolt.
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Installation Instructions (Continued)
Align adjustment bolt with threaded hole in lever
Align adjustment bolt
with threaded hole in
lever
Adjustment bolt needs
to be unthreaded.
16
Use Correct Spindle Orientation
STANDARD
Good Bad
Lever
Adjustment bolt fully aligned.