TRAKAMEC SUPREME INSTALLATION GUIDE TD0192 17/02/20 V1.0 This Document is the subject of copyright and must not be copied or otherwise reproduced either in whole or in part without the express written permission of TRAKA ASSA ABLOY.
What You Should Have ........................5 Tools and Materials Required ......................6 Dimensions ............................. 6 Installation .............................. 8 Technical Support ........................... 13 V1.0 04/02/20 TD0192 Page 3 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
BS 5 lever mortice deadlocks for extra peace of mind and security. Each TrakaMEC Cabinet Cabinet is equipped with electronic Union ASSA ABLOY Code Handle with master key over-ride functionality. These Code Handles can be programed with 9 different user codes and 1 admin code, increasing security around your dealership.
WHAT YOU SHOULD HAVE TrakaMEC Supreme Cabinet 2) Plinth (Optional) Master Override Keys X2 3) Deadlock Night Locks X3 Handle Code X2 V1.0 04/02/20 TD0192 Page 5 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
The wall (and any wall covering) to which the TrakaMEC System is fixed must be made of low flammability material (at least 94 UL-5V flammability class equivalent). DIMENSIONS V1.0 04/02/20 TD0192 Page 6 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
Page 6
V1.0 04/02/20 TD0192 Page 7 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
Position the Plinth in desired location. Ensure the top of the Plinth is level with the wall and the bottom of the Plinth faces as shown in the image below. V1.0 04/02/20 TD0192 Page 8 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
Page 8
Drill the 4 marked holes. Ensure you are using correct PPE including googles and ear protection. Using 4 fixing points, secure the Plinth to the floor using appropriate fixings. V1.0 04/02/20 TD0192 Page 9 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
Page 9
Open the Cabinet door and mark out the 4 fixing holes located inside the Cabinet on the wall referring to the template found in Section 2.3 Dimensions if required. V1.0 04/02/20 TD0192 Page 10 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
Page 10
11. Drill the marked fixing points. Ensure you are using correct PPE including googles and ear protection. 12. Next, insert the correct fixings appropriate to the wall type that you are mounting the Cabinet onto. V1.0 04/02/20 TD0192 Page 11 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
Page 11
15. You are ready to use your Cabinet, your Code Handle is pre-installed with an admin code, and you should have two code cards as well as instructions on how to use the Code Handle. For further information please visit www.trakamec.com V1.0 04/02/20 TD0192 Page 12 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...
4. TECHNICAL SUPPORT If you need to contact Traka/distributor for technical support: Technical Support Information UK Telephone: 0333 920 5809 Web: www.trakamec.com/support V1.0 04/02/20 TD0192 Page 13 of 13 This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”...