About The Manual; Cables Used For Wiring - Mitsubishi Electric TM-RFM Series User Manual

ABOUT THE MANUAL

e-Manuals are Mitsubishi Electric FA electronic book manuals that can be browsed with a dedicated tool.
e-Manuals enable the following:
• Searching for desired information in multiple manuals at the same time (manual cross searching)
• Jumping from a link in a manual to another manual for reference
• Browsing for hardware specifications by scrolling over the components shown in product illustrations
• Bookmarking frequently referenced information
• Copying sample programs to engineering tools
If using the servo for the first time, prepare and use the following related manuals to ensure that the servo is used safely. The
manuals used differ depending on the interface of the servo amplifier. For details, refer to the User's Manual (Introduction).
This manual is necessary primarily for installing, wiring,
and using options.
The manual is necessary for operation of servo amplifiers.
The manual is necessary for using communication functions.
The manual is necessary for adjustment of operation status.
The manual is necessary when looking up details of each
function.
The manual is necessary for specifying the causes of alarms
and warnings.

CABLES USED FOR WIRING

Cables mentioned in this manual are selected based on an ambient temperature of 40 °C.
Introduction
Hardware
Function
Communication Function
Adjustment
Parameters
Troubleshooting
Rotary Servo Motor
Linear Servo Motor
Direct Drive Motor
Partner Encoder
Object Dictionary
3