ED5200N Series Exit Devices
8) Surface Vertical Rod Installation Instructions (Continued)
Install Inside Escutcheon:
The inside escutcheon installs the same for installations with and without the surface vertical rod.
a. Feed excess ElectroLynx® wire harness back into door.
b. Feed excess trim and exit device under head cover.
c. Install inside escutcheon using (2) #8-32 x 5/8" oval head screws.
Note: Be careful not to pinch wires between
escutcheon and door surface.
Notes:
•
Insert the 8- and 4-pin ElectroLynx connectors and establish their
position inside the door prep.
•
Neatly fold the wires onto themselves and into the remaining
space to prevent pinching wires when mounting escutcheon.
Install Inside Escutcheon:
The inside escutcheon installs the same for installations with and without the surface vertical rod.
a. Feed excess ElectroLynx® wire harness back into door.
b. Feed excess trim and exit device under head cover.
c. Install inside escutcheon using (2) #8-32 x 5/8" oval head screws.
Note: Be careful not to pinch wires between
escutcheon and door surface.
Notes:
•
Insert the 8- and 4-pin ElectroLynx connectors and establish their
position inside the door prep.
•
Neatly fold the wires onto themselves and into the remaining space
to prevent pinching wires when mounting escutcheon.
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Normal Installation Instructions (Continued)
17
Inside Face
of Door
P
T O
P
T O