Assa Abloy Corbin Russwin ED5200N Series Installation Instructions Manual page 10

ED5200N Series Exit Devices
5. Install Head Cover:
a. Lay wire harnesses (trim harness and device harness) across ¾" hole (Fig. 5a).
b. Tuck wires into hole when installing cover so that wires are not pinched between head cover and door.
c. Attach head cover using (2) #8-32 flat head screws (Fig. 5b).
Fig. 5a
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Installation Instructions (Continued)
Use 3/4" hole to
tuck trim and
device wire
harness under
head cover,
10
Fig. 5b