Assa Abloy Corbin Russwin ED5200N Series Installation Instructions Manual page 9

ED5200N Series Exit Devices
4. Install Exit Device:
a. Seat device against door being careful to align vertical trim tailpiece to engage with
cross hole of device cam.
b. Fasten device to trim assembly using (2) 1/4-20 pan head screws.
c. Follow instructions packed with device to secure device to door.
d. Tighten all 4 screws.
Fig. 4a
Inside Face of Door
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Installation Instructions (Continued)
9
Fig. 4b
Fig. 4c
Fig. 3c