Installation Of Hardware; Regarding U82; Installing W82 - ABB ESAB W82 Integration Manual

INSTALLATION OF HARDWARE

The installation chapter will describe how to connect the different components. The
ESAB integrated software in the robot controller should be installed by ABB before
delivery to the site.
Regarding U8
2
The U8 is not supported together with the W8
2
Pendant is used for communicating with the power source.
Installing W8
2
Connections and control devices
W8 Integrated
2
1. Indicating lamp
Orange indicating lamp - Overheating
2. Fieldbus
Connection for communication with robot system
3. Measure
Connection for measurement cable for arc voltage feedback and emergency
stop signal, measurement kit
4. Internal CAN
Connections for communication with ESAB wire feed unit and control panel
5. LAN
Connection to network, Ethernet
6. CAN to welding power source
Connection for communication with welding power source
7. USB
USB memory connection
cr09_02
integrated version. The ABB Teach
2
W8 Anybus
2
- 16 -