READ THIS FIRST
Installation must be performed by an experienced person, and electrical work only by
a trained electrician. Use only recommended replacement parts.
This integration manual is intended for use by technicians with electrical/electronic
training for help in connection with installation and integration of robotic equipment
with ESAB products.
Use the spare parts list as a guide to where the components are located in the
equipment. The spare parts list is published as a separate document, see page 33.
This manual contains details of design changes that have been made up to and
including
March 2013.
HOW TO USE THIS MANUAL
This manual describes two different interfaces, W8
Only read and use the information applicable for your chosen interface.
DOCUMENTATION OVERVIEW
The documentation structure. This manual is the ESAB - ABB integration manual.
Power source
Instruction manual
Delivered with the
ABB robot
ABB – robot
Product manual
cr09_00
Delivered in the box with the unit
W 82
Instruction manual
Delivered with the ESAB
robot package
ESAB – ABB
Integration manual
"This manual"
- 3 -
Integrated and W8
2
Delivered in the box with
the wire feeder mounting kit
S0740 800 220/E20130308/P34
Anybus.
2
RoboFeed / FeedControl
Instruction manual
RoboFeed / FeedControl
Assembly instruction
© ESAB AB 2013