Maintenance; Battery Warning And Battery Replacement When Srel.bat Is Used; Backup Battery - Simons Voss Technologies SREL Manual

Hide thumbs Also See for SREL:
Table of Contents

Advertisement

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2

10 Maintenance

10.1 Battery warning and battery replacement when SREL.BAT is used

10.2 Backup battery

(Manual)
A SmartRelay can emit a battery warning as follows when the battery
capacity is depleted:
SREL, SREL.ZK and SREL.ADV
Inside LED flashes 8x each time a transponder is used and before
the SmartRelay switches.
This LED should be visible from the outside in the case of battery-
powered operation.
SREL.ADV only
External LED flashes 8 times or external buzzer beeps 8 times
whenever a transponder is used.
NOTE
Around another 100 activations are possible after a battery warning.
Transponder battery must be replaced as soon as possible.
A discharged backup battery may lead to the internal clock stopping in
SmartRelays. We therefore recommend checking the time on the clock at
regular intervals. A backup battery will last for about ten years if the power
supply to the SmartRelay is not interrupted. This battery should be
replaced on a periodical basis if SmartRelay draws on the backup battery
at regular intervals due to frequent power failures.
NOTE
The backup battery must not be used if SmartRelay is powered by a bat-
tery (SREL.BAT).
10. Maintenance
36 / 44

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SREL and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Srel.advSrel.wSrel.g2Srel.g2.wSrel2.g2

Table of Contents