Accessories - Simons Voss Technologies SREL Manual

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2

5.2 Accessories

(Manual)
SmartRelay ZK

Similar to the basic version (SREL), but with the option of access event
logging connected separately for the last 1,024 accesses (firmware
version 4.0.01.15 and higher) with date and time, or day-time zones for
up to five user groups and automatic locking and unlocking.
SmartRelay Advanced version

Similar to the ZK version but with the following additional functions:
Connection for external modules via a three-wire bus.

Connection to an external antenna.

Connections for serial ports to external time-and-attendance

terminals or access control readers.
Connection for external LED or buzzer.

SmartRelay 2

The SREL2.G2.W is basically used with transponders, i.e. as purely
"active" components. There is also the option of using a
CompactReader and thus operating the SREL2 with Mifare Classic/
®
DERFire cards. This SmartRelay provides simple yes/no authorisation
for a maximum of 64,000 different transponders.
SmartRelay 2 ZK

The same as the basic version (SREL2.G2), but with the option of
access event logging with date and time connected separately for the
last 1,024 accesses, or day time zones for up to 100 user groups and
automatic locking and unlocking (time-controlled switch-over). This
version can also be used as a gateway in a virtual network.
SmartRelay 2 MH

As the ZK version. Two external card readers (SC.M.E.G2) and an
internal card reader (SC.M.I.G2) can be connected to this version. Mifare
®
Classic/DESFire cards can be operated on this SREL2.
SmartRelay can be combined with a variety of accessories. Carefully check
which combinations can be used before placing an order.
Accessories for SmartRelay 3063 G1
MOD.SOM8
SREL.AV
SREL.BAT
SREL SREL.ZK
X
5. General
12 / 44
SREL.ADV
X
X
X X