Simons Voss Technologies SREL Manual page 28

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2 (Manual)
Time switching
OMRON
8. Configurations in the software
For SREL.ZK and SREL.ADV only. A
time zone plan needs to be up-
loaded when the time switch-over is
activated. This allows SmartRelay
to remain unlocked during the indic-
ated times (in Group 5). During the
day, the door can be used freely
while only a transponder will open
the door at night.
You should ensure that mains ad-
apters and electric strikes are suit-
able for continuous current opera-
tion in such an installation.
For SREL.ADV only Many access
control and time-and-attendance
systems feature serial interfaces to
connect card readers. A SmartRelay
can also be connected via these in-
terfaces, thus also allowing you to
use SimonsVoss transponders in
third-party systems.
Select this option on both the
SmartRelay and the cylinder if you
wish the SmartRelay to transmit
transponder data to a third-party
system and a remote opening com-
mand to be sent from SmartRelay
to a cylinder after clearance by the
third-party system.
Set the type of external system un-
der "Interface". Click on the Exten-
ded configuration button to do so.
28 / 44