Simons Voss Technologies SREL Manual page 29

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2 (Manual)
Some settings can be specified using the Extended configuration button:
Pulse length
Restricted range
Log unauthorised attempts
8. Configurations in the software
This is where you indicate the num-
ber of seconds for the duration of
switch pulse. The value can be set
at 0.1 to 25.5 seconds. If you enter 3
seconds, for example, an electric
strike is released for 3 seconds be-
fore it locks again.
If you select this option, the reader
range from the transponder to the
SmartRelay is reduced from 1.5 m to
about 0.4 m. This option can be
used when several SmartRelays are
in close proximity to one another
and individual transponders are au-
thorised for use on several
SmartRelays, for example.
For SREL.ZK and SREL.ADV only:
Normally, only authorised transpon-
der operations are logged. You need
to select this option if you also wish
to record attempts to open the door
with non-authorised transponders.
29 / 44