Simons Voss Technologies SREL Manual page 33

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2 (Manual)
This option is enabled for all G2 SmartRelays as standard. The LSM first
adds a data record for an active locking device and checks whether the
locking device has an interface during programming. If no card interface
is detected, LSM automatically disables the checkbox. You no longer
need to indicate whether you have an active or hybrid SmartRelay G2
for LSM 3.3 or higher.
NOTE
If you change the card interface setting manually, automatic detection will
no longer function and warning messages will be emitted.
Some settings can be specified using the "Extended configuration" button:
Interface

You can enter the type of card reader here which the SmartRelay is to
simulate for operation as a serial interface.
The following options are available:
Wiegand, 33 bit

Wiegand, 26 bit

Primion

Siemens

Kaba Benzing

Gantner Legic

Isgus

External LED/external beeper

8. Configurations in the software
33 / 44