Configurations In The Software; Lsm; Smartrelay (G1): Srel, Srel.adv, Srel.w - Simons Voss Technologies SREL Manual

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2

8 Configurations in the software

8.1 LSM

8.1.1 SmartRelay (G1): SREL, SREL.ADV, SREL.W

(Manual)
SmartRelays are very specific due to their hardware and can therefore only
be operated in environments designated for them.
Item order code
SREL
SREL.ZK
SREL.ADV
SREL.G2
SREL.ZK.G2
SREL.W.G2
SREL.W.ZK.G2
SREL2.G2.W
SREL2.ZK.G2.W
SREL2.ZK.MH.G2.W
MK.SREL2.ZK.G2.W
MK.SREL2.LN.ZK.G2.W
The SmartRelay's settings can be adjusted in the [Configuration/Data] tab
in the locking device's properties.
This tab ([Configuration/Data]) is divided into two sides:
The left side shows the target status of the locking device ("Actual") –

i.e. the desired status configured in the LSM software.
The right side shows the locking device's current status ("Target") – i.e.

the status which was last programmed.
8. Configurations in the software
Protocol generation
G1: Type G1 or G2 + G1
locking systems only
G2: Type G2 or G2 + G1
locking systems only
MobileKey
26 / 44
Software
LSM
MobileKey