Simons Voss Technologies SREL Manual page 32

SREL, SREL.ADV, SREL.W SREL.G2,
SREL.G2.W, SREL2.G2 (Manual)
ZK and ADV possible. The most recent transponder transactions are
logged with the date and time.
Time zone control

Only possible in SREL.ZK and SREL.ADV versions. A time zone plan can
be uploaded and the transponders are approved or blocked according
to their time zone group.
Logging unauthorised attempted access events

For ZK and ADV only: Normally, only authorised transponder operations
are logged. You need to select this option if you also wish to record
attempts to open the door with non-authorised transponders.
Gateway

SmartRelay can be used as a gateway.
Flip-flop

Pulse mode (default setting) is switched off and the pulse duration no
longer plays a role. When flip-flop mode is activated, SmartRelay
changes its status from on to off or vice versa each time it is activated
using a transponder. This mode is ideal for switching lights, machines
and other systems on and off.
Where applicable, you should ensure that mains adapters and electric
strikes are suitable for continuous current operation in such an
installation.
Internal antenna always on

Even if an external antenna is connected, the internal antenna is still
used at the same time.
Close range mode (for internal antennas only)

Close range mode is activated.
Time switch-over function

For SREL.ZK and SREL.ADV only. A time zone plan needs to be
uploaded when the time switch-over is activated. This allows
SmartRelay to remain unlocked during the indicated times (in Group 5).
During the day, the door can be used freely while only a transponder will
open the door at night.
You should ensure that mains adapters and electric strikes are suitable
for continuous current operation in such an installation.
Permit exceptions in time zone management

Exceptions are permitted in time zone management if this checkbox is
enabled.
Card interface

8. Configurations in the software
32 / 44