Advertisement
If the compatible mode setting is set to "FP-X mode", "Table setting mode" cannot be selected.
1.1.2 Unit type and available functions
Available conditions vary by functions.
■
Comparison of functions and performances
Item
Configuration
Single-
phase
High-
speed
counter
2-phase
Indepen
dent
Pulse
Output
Interpol
ation
PWM output
WUME-FPXHPOSG-01
Transistor output type
C14T
C30T
Using the input section of the Control Unit
Using the output section of the Control Unit
Max. 8 channels (CH0 to CH7)
Max. 100 kHz × 4 + Max. 10 kHz × 4
Max. 4 channels (CH0, CH2, CH4, and CH6)
Max. 50 kHz × 2 + Max. 10 kHz × 2
Max. 3 axes
Max. 4 axes
(CH0 to CH2)
(CH0 to CH3)
Max. 4 axes
Max. 2 axes
(CH0 and
(CH0)
CH2)
Max. 4 points (CH0 to CH3)
C60T
C14R
Using the input section of the Control Unit
or the input section of the pulse I/O
cassette
Using the output section of the pulse I/O
cassette
Using the input of the Control Unit
Max. 8 channels (CH0 to CH7), Max. 10
kHz × 8
Per one pulse I/O cassette
Max. 2 channels (CH8 and CH9 or CHA
and CHB)
Max. 100 kHz × 2
Using the input of the Control Unit
Max. 4 channels (CH0, CH2, CH4, and
CH6), Max. 5 kHz × 4
Per one pulse I/O cassette
Max. 1 channel (CH8 or CHA)
Max. 50 kHz×2
Per one pulse I/O cassette: Max. 1 axis
Max. 6 axes
Max. 1 axis
(CH0 to CH5)
(CH0)
Max. 6 axes
Not available Max. 2 axes (CH0)
(CH0, CH2,
and CH4)
Per one pulse I/O cassette: Max. 1 point
Max. 1 point
1.1 Functions of Unit
Relay output type
C30R
C60R
Max. 2 axes (CH0 and
(Note 3)
CH1)
(Note 3)
Max. 2 points (CH0 and
(Note 3)
CH1)
1-3
Advertisement
