Finding Instruments On A Network - Thermo Scientific TEOM 1405 Manual

S S S S S 3 3 3 3 3
ECTION ECTION ECTION
ECTION ECTION
B O
ASIC PERATION
Finding Instruments Finding Instruments
Finding Instruments Finding Instruments Finding Instruments
On a Network On a Network
On a Network On a Network On a Network
Figure 3-23. Figure 3-23. Figure 3-23. Figure 3-23. Figure 3-23.
ePort Main screen with
"Searching for Instruments..."
message.
3-20 O G , TEOM 1405
PERATING UIDE
You may use the ePort software to search for all instruments connected to
the local network.
This function will only locate instruments on a local network. To connect
to instruments on other connected networks, you must know the IP
address of the instruments and connect to the unit manually using the New
Instrument function of the software (Figure 3-20). Refer to the previous
section for information on connecting to an instrument off the local
network. Instruments on a network must have a unique IP address, or be
connected through a router.
To locate all instruments on the network: To locate all instruments on the network:
To locate all instruments on the network: To locate all instruments on the network: To locate all instruments on the network:
1. Open the ePort software program and select "Find Samplers" in the
Open screen (Figure 3-19).
2. The ePort Main screen will display with a "Searching for
Instruments..." message. As instruments are located by the software
they will be added to the list in the Instrument frame on the left side of
the screen (Figure 3-23).
T F S
HERMO ISHER CIENTIFIC