Oracle MICROS 6 Series Setup Manual page 63

Table 9-2 (Cont.) BIOS Security Settings
Setting
HDD Password Select
HDD Security Status
Other BIOS Security Settings
The following table lists other security-related settings in the Oracle MICROS
Workstation 625/655 BIOS System Configuration Utility.
Table 9-3 Other BIOS Security Settings
Setting
Casework Open Actions
To access the Casework Open Actions
settings, tap the Workstation option on the
BIOS System Configuration Utility Home
screen, and then scroll to the end of the list.
Casework
You can access additional casework settings
by tapping the Casework option on the BIOS
System Configuration Utility Home screen.
Secure Boot Configuration
To access Secure Boot Configuration settings,
tap the Misc option on the BIOS System
Configuration Utility Home screen, and then
scroll to the end of the list.
Configuring System Security Settings
Description of Option
Select the password structure to apply to hard
disk drives:
• User Only: Supports user account
passwords.
• User + Master: Supports user account
passwords and a master password.
Displays the password status of workstation
hard drives and allows you to specify user and
master passwords.
Description of Option
Select the action taken by the system if the
workstation casework is compromised:
• Startup Warning: Presents a warning
during startup if the system detects the
workstation casework was compromised.
• Forced Off: Turns off the workstation if
the system detects the casework was
compromised.
• None: Disables Casework Open actions.
Clear Casework Events:
• Off (default)
• On: Clears all casework events.
Casework Switch States
Displays the current state of each casework
switch.
• Casework Switch
• IO Casework Switch
• RRM Casework Switch
• Stand Casework Switch
Disabled by default. To enable, set
the Supervisor Password on the Account's
Password Status screen under the Security
option.
Chapter 9
9-4