Table of Contents
Advertisement
WINDSHIELD WIPER SWITCH
Operate wiper switch (1) to move the windshield wiper.
INT:
The wiper intermittently operates.
OFF:
The wiper stops moving and the wiper blade is re-
turned to the pre-start position.
LO:
The wiper operates at slow speed
HI:
The wiper operates at fast speed.
Washer: As long as wiper switch (1) is depressed, the washer
fluid is dispensed.
IMPORTANT: The washer motor may become damaged if
washer fluid is continuously used for more
than 20 seconds or the wiper switch is oper-
ated with no fluid in the washer tank. Take
care about the switch operation time and
the fluid level in the washer tank.
REAR WINDOW WIPER SWITCH
Press the button marked with (
(2) to move the rear window wiper.
Press the button marked with (
(2) to dispense the washer fluid.
IMPORTANT: The washer motor may become damaged if
washer fluid is continuously used for more
than 20 seconds or the wiper switch is oper-
ated with no fluid in the washer tank. Take
care about the switch operation time and
the fluid level in the washer tank.
OPERATOR'S STATION
) of rear window wiper switch
) of rear window wiper switch
1
1-31
M4GB-01-062
M4GB-01-063
2
M4GB-01-042
2
M4GB-01-064
Advertisement
Chapters
Table of Contents
