Lift Arm Auto Lever Switch (Optional) - Hitachi ZW180 Operator's Manual

LIFT ARM AUTO LEVER SWITCH (Optional)

Downward Set/Upward Set
Switches (1), (2) stops the downward or upward lift arm at the
specified height.
IMPORTANT: • When the lift arm auto leveler switch is
activated with the bucket loaded, the arm
may be stopped at a position lower than
the preset position.
• Lowering lift arm stop position cannot be
preset at a position higher than the arm
level position.
Raising arm stop position cannot be preset
at a position lower than the arm level posi-
tion.
Lift Arm Auto Leveler Function
Switch
SET (4 and 8): Presets the lift arm stop position.
ON (5 and 9): Stops the lowering lift arm at the specified
height.
OFF (6 and 10): Deactivate the lift arm auto leveler func-
tion.
Presetting of lowering lift arm stop position
1. Hold the lift arm in the position at which the lowering lift
arm is desired to stop.
2. While deactivating lock switch (3) on lift arm auto leveler
switch (lowering) (1), press SET side (4).
Presetting of raising lift arm stop position
1. Hold the lift arm in the position at which the raising lift
arm is desired to stop.
2. While deactivating lock switch (7) on lift arm auto leveler
switch (raising) (2), press SET side (8).
OPERATING THE MACIHINE
5-7
1 3
Deactive
Downwark
2 7
Deactive
Upward
3
4
5
6
M4GB-01-081
7
8
9
10
M4GB-01-082