Seat Belt - Hitachi ZW180 Operator's Manual

SEAT BELT

WARNING: Always use the seat belt when operating
the machine. Before operating the machine, be sure
to examine the seat belt and attaching hardware for
any failure. If any damage and/or wear is found, re-
place the part concerned. Replace the seat belt every
three years regardless of its appearance.
Seat Belt
1. Seat belt (1) on this machine is a recoiling type.
2. Confirm that seat belt (1) is not twisted. Securely insert
the end of seat belt (1) into buckle (2).
NOTE: When trying to insert seat belt (1) into buckle (2), in
case the belt is suspended to extend and does not come
out further, fully retract the belt to the original position
and try to extend again.
3. Press button (3) on buckle (2) to unfasten seat belt (1).
OPERATOR'S STATION
1-67
1
3
2
M4GB-01-105