Hitachi ZW180 Operator's Manual page 102

Multi-Function Type
Is used to operate the lift arm and the bucket.
(C) Float: The lift arm free falls and can be moved as loads are
applied.
(B) Lift arm Lower
(N) Hold: The lift arm is stopped and held in that position.
(A) Lift arm Raise
(F) Detent: The lift arm is held in the raised position.
(G) Detent: When the lever is moved from the bucket dump
position to the bucket tilt position, the lever is held in
that position.
(D) Bucket Tilt
(N) Hold
(E) Bucket Dump
OPERATOR'S STATION
C
G
1-50
B
E
N
D
A
F
D
M4GB-01-008
C
B
E
N
A
M4GB-01-074
M4GB-01-073