High-Low Beam Switch; Key Switch - Hitachi ZW180 Operator's Manual

HIGH-LOW BEAM SWITCH

Shifts the direction of the headlight beam high and low.
CAUTION: Travel the machine with the headlight in
the low beam position when other vehicles are pres-
ent in the vicinity.
After turning the headlight ON, when turn signal lever (7) is
lightly raised until a click sound is head, the headlight beam
is set in the high position and high beam indicator (8) comes
OFF.

KEY SWITCH

WARNING: Before starting the engine, return the
forward/reverse selector lever and forward/reverse
selector switch to neutral, apply the parking brake,
and lock the control levers. Refer to the descriptions
in the OPERATING THE ENGINE section for the detail
information.
WARNING: Never turn key switch (9) OFF while travel-
ing the machine. Failure in the electrical system and/
or base machine may result.
1- OFF (Engine Off )
2- ACC (Radio)
3- ON (Engine On)
4- START (Engine Start)
OPERATOR'S STATION
1-30
8
9
2
3
1
9
7
M4GB-01-059
M4GF-01-001
M4GB-01-046
4
M4GB-01-089