Hitachi ZW180 Operator's Manual page 154

STARTING TO MOVE
WARNING: Start to move the machine only after
checking that no personnel and/or obstacles are pres-
ent around the machine.
Do not turn ride control switch (5) ON while travel-
ing the machine and/or raising the front attachment.
Turn ride control switch (5) only after stopping the
machine and ensuring safety around the bucket.
Failure to do so will allow the lift arm to rise, possibly
creating a dangerous situation.
Refer to page 1-56 for information about ride control switch (4).
1. Check that none of the warning indicators except service
indicator (2) on the monitor panel (1) are ON.
2. Set the front attachment in the driving attitude by oper-
ating bucket control lever (3) and lift arm control lever (4).
3. Press neutral lock switch (6) to the UNLOCK position (7).
DRIVING THE MACHINE
4-2
4
3
Driving Attitude
6
1
2
M4GF-01-001
5
M4GB-03-001
M4GB-04-001
7
M4GB-01-042