Clock Setting Mode - Hitachi ZW180 Operator's Manual

CLOCK SETTING MODE

The clock display on the information display screen can be set
in the clock setting mode. After selecting the clock display on
the information display screen, press and hold both selectors
(1 and 2) at the same time for more than 1 second to shift the
information display screen to the clock setting mode.
Clock (24H) Setting Procedures
1. Year Setting
Press monitor display selector (2 or 3) to increase or de-
crease the figure displayed on the screen respectively. After
displaying the desired year, determine the displayed year by
pressing monitor mode selector (1). Then, move to the next
setting screen.
2. Month Setting
Press monitor display selector (2 or 3) to increase or de-
crease the figure displayed on the screen respectively. After
displaying the desired month, determine the displayed year
by pressing monitor mode selector (1). Then, move to the
next setting screen.
3. Day Setting
Press monitor display selector (2 or 3) to increase or de-
crease the figure displayed on the screen respectively. After
displaying the desired day, determine the displayed year by
pressing monitor mode selector (1). Then, move to the next
setting screen.
4. Hour Setting
Press monitor display selector (2 or 3) to increase or de-
crease the figure displayed on the screen respectively. After
displaying the desired hour, determine the displayed year
by pressing monitor mode selector (1). Then, move to the
next setting screen.
5. Minute Setting
Press monitor display selector (2 or 3) to increase or de-
crease the figure displayed on the screen respectively. After
displaying the desired minute, determine the displayed year
by pressing monitor mode selector (1). Then, clock setting is
complete.
Error Code
If the letters of "ERROR" are displayed, contact your nearest
HITACHI dealer for machine inspection.
OPERATOR'S STATION
1-25
3 2
Year
Month
Day
Hour
Minute
1
M4GF-01-001
M4GB-01-057
M4GB-01-058