Subscribe to Our Youtube Channel
Related Manuals for Clarke CSG1C
Summary of Contents for Clarke CSG1C
- Page 1 AIR STAPLER MODEL NO: CSG1C PART NO: 3110375 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC10/17 ISS2...
- Page 2 The Clarke CSG1-C is ideal for packaging, carpet laying, upholstery etc. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 3: Specification
Weight 0.85 kg Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. -
Page 4: Safety Warnings
SAFETY WARNINGS WARNING: READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY RESULT IN SERIOUS INJURY. WARNING: SAVE THIS DOCUMENT FOR FUTURE REFERENCE. WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. - Page 5 4. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 5.
-
Page 6: The Compressed Air Supply
THE COMPRESSED AIR SUPPLY AIR SUPPLY REQUIREMENTS WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF COMPRESSORS AND COMPRESSED AIR SUPPLIES. • Use only clean, dry, regulated compressed air as a power source. •... - Page 7 • Turn on the air supply and check for air leaks. Rectify any found before proceeding. Your air tool is now ready for use. You can fit a whip hose with a quick fit coupling if required (available from your Clarke dealer.). Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 8: Operation
ASSEMBLY Ensure the stapler is not loaded, then, with the air supply turned off, connect the air line to the stapler at the quick fit coupling. Turn the safety catch to the position shown, to prevent the trigger from being pulled. Then with the tool pointed away from you and anyone in the vicinity, depress the magazine catch, pull out... -
Page 9: Disconnecting The Air Supply
1. Before use, drain water from the compressed air supply. 2. Check and clean, if fitted, the air inlet gauze filter. 3. A bottle of CLARKE Air Line Oil** is supplied with the kit. Squirt a few drops of oil approx. 3cc), into the air inlet. -
Page 10: Service And Repairs
If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of Clarke air line oil into the air inlet, and run the tool for 5 seconds in order to lubricate the internal parts. - Page 11 CONSUMABLES Staples - 9mm Crown - Type 71 Length Part No: 1800400 10mm 1800402 12mm 1800403 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 12: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 13: Parts Diagram
PARTS DIAGRAM Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 14: Parts List
PARTS LIST Description Description Bolt M5 x 50 Trigger Exhaust Deflector Circlip 2.5 dia Compression Spring Bolt M5 x 20 Rectangular Washer Spring Washer 5 Cylinder Cover Nose Guide O-Ring 11.7 x 2.1 Spacer O-Ring 16.2 x 2.1 Fixed Magazine Piston Stop Plate Collar... - Page 15 NOTES __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CSG1C and is the answer not in the manual?
Questions and answers