Machine Coordinate Positioning Commands; G53; G53.1 - Adtech ADTECH9 Series Programming Manual

ADTECH9 Series CNC Programming Manual

2.7 Machine coordinate positioning commands

2.7.1. G53

A command used to position each axis to the machine coordinate
Format: G53 X_(Y_ Z_ A_ B_ C_)
X(Y_ Z_ A_ B_ C_): Machine coordinate position.
Note: The speed uses the axis rapid traverse parameters.

2.7.2. G53.1

A command used to position the interpolation to machine coordinate
Format: G53.1 X_(Y_ Z_ A_ B_ C_) F_
X(Y_ Z_ A_ B_ C_): Machine coordinate position.
F: Interpolation positioning speed