Accessories - Pepperl+Fuchs 2-D LiDAR R2000 Series Manual

2-D LiDAR Sensor
Product Description
3.8

Accessories

The following products are available as accessories.
Name
V1SD-G-2M-PUR-
ABG-V45-G
V1SD-G-5M-PUR-
ABG-V45-G
V1SD-G-ABG-PG9
V1-G-2M-PUR
V1-W-2M-PUR
MH-R2000
Note
Installation note for North America
If a connection is made with the M12 multi-pin connector, in the final installation of
the power supply the product must be used with a UL-listed cable/connector
assembly (CYJV) that is designed for at least 30 VDC and at least 1.0 A.
Name
V1-G-BK-2M-PUR-U
V1-G-BK-5M-PUR-U
V1-G-BK-10M-PUR-U
To parameterize the R2000 conveniently via a software interface, you will need the
corresponding device type manager (DTM) in addition to the FDT framework
program (PACTware 4.x or above). PACTware and the DTM are available at
www.pepperl-fuchs.com.
14
Description
Patch cable, M12 to RJ45, length 2 m
Patch cable, M12 to RJ45, length 5 m
Single-ended male cordset, M12 D-coded, 4-pin for bus cable
Single-ended female cordset, straight, M12, 4-pin, PUR cable
Single-ended female cordset, angled, M12, 4-pin, PUR cable
Mounting bracket, quick-release and adjustment device
Description
Single-ended female cordset, straight,
M12, 4-pin, PUR cable, length 2 m, "UL
recognized"
Single-ended female cordset, straight,
M12, 4-pin, PUR cable, length 5 m, "UL
recognized"
Single-ended female cordset, straight,
M12, 4-pin, PUR cable, length 10 m, "UL
recognized"