Accessories - Pepperl+Fuchs VIM6 Series Manual

VIM6* Vibration Sensors
Product Description
Frequency Response: 1 Hz to 1000 Hz
The frequency response was recorded using two reference sensors.
The cut-off frequencies are 1 Hz and 1000 Hz with -3 dB damping.
Figure 2.3
1 Frequency in Hz
2 Gain in dB
2.3

Accessories

Note
Various accessories are available for the VIM6* vibration sensors. These accessories are
available online at www.pepperl-fuchs.com, on the product page for the relevant VIM6*
vibration sensor.
Available Accessories
Accessories
Cordset for plug versions
EMC adapter
Mounting adapter
Rubber protective sleeve
Flexible metal conduit
10
Use
Electrical connection for plug versions
For insulating the sensor from the mounting point to protect
against sources of EMC interference.
Adapter with different thread sizes for specific mounting
requirements at the mounting point.
Flexible plastic cover for additional protection of the sensor
against chemical and mechanical influences.
Flexible metal conduit for additional protection of the internal
cable against chemical and mechanical influences.